How to Adjust Fog Lights

Are you looking to adjust the fog lights on your car? It’s a simple process that can help you see further and better in low-visibility conditions. Here are some tips on how to adjust fog lights.

Visibility on the road in foggy conditions can be a challenge for even the most experienced drivers. But with some basic preparation and understanding of the features of your vehicle, those moments spent driving through low visibility aren’t nearly as intimidating. One such feature that helps drivers out when dealing with fog is fog lights – but how do you use them, where should they be aimed, and what else should you know?

How to Adjust Fog Lights

In this post, we’ll go over what you need to know about setting up and using your vehicle’s fog 

light system safely and effectively so that you can drive confidently, no matter how much fog is out there. Let’s get started!

What Will You Need?

Before we dive into adjusting your fog lights, let’s look at what you will need:

  1. A flathead screwdriver
  2. A torque wrench (optional)
  3. An adjustable light meter (optional)

Now that you have everything you need, it’s time to adjust your fog lights.

10 Easy Steps on How to Adjust Fog Lights

Step 1: Check the Owner’s Manual

The first step before adjusting your fog lights is to check your owner’s manual for any specific recommendations from the manufacturer. It’s important to follow these instructions closely as they may contradict other sources. Ensure that all the necessary equipment is ready before you start.

Step 2: Inspect the Fog Light Assembly

Next, you’ll want to inspect the fog light assembly itself for any dirt or debris that might prevent it from easily adjusting. Remove any visible dirt with a damp cloth and check each of the screws and bolts to make sure they are not loose. Be careful not to overtighten the screws and bolts as this could cause damage.

Step 3: Adjust the Screws on the Mounting Bracket

Inspect the Fog Light Assembly

Using your flathead screwdriver, adjust the screws on the mounting bracket so that they are tight but not over-tightened, as this can damage the bracket. Remember that if your vehicle has an adjustable foglight beam, you will need to loosen these screws slightly to make adjustments. As always, refer to your owner’s manual for specific instructions on adjusting your foglights’ beam.

Step 4: Check Torque Settings

If your vehicle has adjustable foglight beams, you will need to check the torque settings for these screws. This is best done with a torque wrench and following the manufacturer’s instructions. Check the owner’s manual for more information.

Step 5: Adjust the Foglights

Once you have checked and adjusted the mounting bracket, it’s time to adjust the foglight beam. In order to do this, you will need an adjustable light meter or some other type of light measurement device in order to ensure that the beam is aligned correctly. Adjust the beam in small increments until you reach your desired brightness level.

Step 6: Mark Your Desired Beam Angle and Range

Use a marker or piece of tape to clearly mark where you want your foglight beam angle and range on each side of your car – this will help you easily reference your desired settings when making adjustments. You can also use the owner’s manual to get an idea of where this should be set.

Step 7: Make Adjustments to the Aim of the Fog Lights

Once you have marked where you want your foglight beam angle and range, you can begin adjusting to the fog light’s aim. Most vehicles will come with an adjustable bracket that allows for easy adjustment – just turn one side or the other until it is pointing in the correct direction.

Step 8: Check Beam Alignment

Once each fog light is adjusted, check their beam alignment using either a light meter or an approximate method, such as looking at a white wall from a distance of 25-30 feet. You should see two distinct beams side by side – if they overlap, then you need to adjust the foglights again until they are aligned correctly.

Step 9: Tighten Mounting Bolts and Screws

Using a Torque Wrench

Once you have adjusted the fog lights, it’s important to secure them by tightening any mounting bolts and screws you may have loosened during installation. Make sure not to over tighten these, as this can cause damage to the assembly. If you are using a torque wrench, check the manufacturer’s instructions for the recommended settings.

Step 10: Test Your Fog Lights Out!

Finally, once your fog lights are securely mounted and adjusted, test them out on a low visibility day! With proper setup and use of your vehicle’s features, you should be able to navigate through even the worst of fog with ease and confidence. Remember to use caution while driving any time visibility is low.

And there you have it! You’ve just learned how to adjust fog lights in 10 easy steps. With these tips, you should be able to get the job done quickly and easily – so go out and enjoy those foggy days without worrying about poor visibility!

5 Additional Tips and Tricks

1. Ensure you have the right tools to adjust your fog lights. To complete the job, you will need a flathead screwdriver and a ratchet set.

2. Make sure the fog lights are adjusted correctly before you start adjusting them. A good way to do this is to use a level, as it will help keep your fog lights at the same angle as each other.

3. When adjusting your fog lights, ensure they are aimed properly and evenly to achieve optimal brightness and clarity of vision.

4. Check your vehicle’s owner’s manual for specific instructions on accurately adjusting the height and angle of your fog lights.

5. After adjusting the fog lights, make sure you test them out by driving around after dark with the headlights off so that you can see if any adjustments need to be made before hitting the road again!

With these tips and tricks, you should have no problem adjusting your fog lights to get the most out of them when driving in foggy conditions.

5 Things You Should Avoid

Avoid Aiming the Fog Lights Too High

1. Avoid adjusting your fog lights during the day, as this can be difficult to judge their accuracy.

2. Avoid aiming the fog lights too high – a good rule of thumb is that they should never exceed 36 inches above the road surface.

3. Avoid using sharp objects when adjusting your fog lights, as you could damage them.

4. Avoid over-tightening screws and bolts when installing or adjusting your fog lights, as this may cause damage to the components.

5. Never aim your fog lights directly at other drivers or pedestrians – this can be dangerous and illegal, depending on where you live!

Following these tips and tricks for adjusting fog lights will ensure that they are adjusted correctly and safely. This will also help ensure you get the best visibility possible while driving in foggy conditions. Be sure always to drive safely and never aim your fog lights at other drivers or pedestrians!

Where Should Fog Lights Be Adjusted to?

Fog lights should be adjusted to a height of about 36 inches above the road surface. This is the optimal height for achieving clear vision in foggy conditions. The angle of the beams should also be adjusted so that they spread as wide as possible but not too far up or down that it causes glare or light to spill onto other drivers. Finally, make sure the fog lights are aimed at a downward angle to ensure maximum efficiency and clarity when driving in foggy conditions.

Additionally, it is important to test out your fog lights after adjusting them to make sure that they are adjusted correctly. An easy way to do this is by driving around after dark with the headlights off, so you can see exactly how the light from your fog lights is spread. By following these steps to adjust fog lights, you will be able to ensure that you’re getting the most out of your fog lights and that they are adjusted properly.

Avoid Over Tightening Screws and Bolts


Adjusting your fog lights is an easy way to make sure you have optimum visibility when you’re out on the road. To finish, there are a few things to remember while adjusting your fog lights. Ensure they are aimed correctly and that their alignment has not been affected by any bump or dips in the road. Have patience while adjusting them, as it may take some time, but it will be worth it in the end. Finally, do not overlook regular maintenance of your fog lights since keeping them clean can improve their performance and increase visibility.

All in all, taking the time to readjust your fog lights can help ensure a safer driving experience and provide you with greater visibility in low-light conditions.

Hopefully, the article on how to adjust fog lights has been helpful in getting you ready for your next night’s drive! Happy driving, and stay safe out there. Thanks for reading!

Leave a Comment