How to Hang Led Strip Lights in Bedroom

Are you looking for a way to make your bedroom look more inviting and stylish? Well, consider adding some LED strip lights. They’re a great way to brighten up the space and create an inviting atmosphere.

How-to-Hang-Led-Strip-Lights-in-Bedroom

While it may seem daunting at first, you can have them up in no time with a little bit of know-how. This blog post will show you how to hang LED strip lights in bedroom.

We will also provide tips on choosing the right LED strip lights for your bedroom. So read on and learn how to light up your life with some LED Strip Lights!

What Tools & Supplies You’ll Need?

Before we get started, let’s take a look at the tools and supplies you’ll need for this project.

  • Tape measure
  • Step ladder or stool
  • Phillips screwdriver
  • LED strip lights
  • Power drill (optional)
  • Pushpins or adhesive strips

Step by Step Guide: How to Hang LED Strip Lights in Bedroom

Step 1: Prepare Your Work Area.

Before you start, it’s important to clear your work area and lay down some drop cloths. This will help to protect your furniture and floors from scratches.

It might also be helpful to lay out your LED strip lights on the floor so you can plan how you want to arrange them.

Step 2: Choose the Mounting Location.

Now it’s time to choose the mounting location for your LED strip lights. If you’re not sure where to put them, we recommend starting with the headboard.

Choose-the-Mounting-Location

This is a popular spot because it provides ambient lighting that can be used for reading or relaxing in bed.

Step 3: Measure and Cut the LED Strip Lights.

Once you’ve decided on the mounting location, it’s time to measure and cut the LED strip lights. Most LED strip lights come with a built-in cutting line so you can easily customize them to fit your space. You only need to cut along this line when you’re ready to install the lights.

Step 4: Clean the Surface Area.

Before you install the LED strip lights, it’s important to clean the surface area. This will help to ensure that the lights adhere properly. We recommend using a lint-free cloth and some rubbing alcohol. If you don’t have any rubbing alcohol, you can also use soap and water.

Step 5: Wait for the Surface to Dry.

After you’ve cleaned the surface area, it’s important to wait for it to dry completely. This usually takes about 30 minutes.

To make sure the surface is dry, you can test it with a lint-free cloth. If the cloth comes away clean, then the surface is ready for the next step.

Step 6: Peel Off the Backing.

Now it’s time to peel off the backing on the LED strip lights. Be careful not to touch the sticky side of the lights as this can cause them to lose their adhesive properties.

Peel-Off-the-Backing

When peeling the backing, we recommend starting at one end and slowly working your way to the other.

Step 7: Apply the LED Strip Lights.

Once you’ve removed the backing, it’s time to apply the LED strip lights to the chosen surface area. Again, we recommend starting at one end and gently pressing the lights into place. As you work your way down, make sure to space out the lights evenly.

Step 8: Connect the LED Strip Lights.

After applying the LED strip lights, it’s time to connect them. Most LED strip lights come with a connector that makes it easy to attach them to an electrical outlet.

If your lights don’t have a connector, you can always use a power drill to make a hole for the cord.

Step 9: Connect the Power Supply.

Now it’s time to connect the power supply. This is usually done by plugging the power cord into an outlet.

Connect-the-Power-Supply

Once the power cord is plugged in, you should see the LED strip lights turn on. If they don’t, check the power supply and ensure that it’s turned on.

Step 10: Test the LED Strip Lights.

Before you call it a day, it’s always a good idea to test the LED strip lights. This will help to make sure that they’re working properly.

Once you’ve verified that the lights are working, you can sit back and enjoy your new ambient lighting.

Some Tips to Get an Ambient Lighting Setup in Your Bedroom

1. Choose your LED strips. There are a few things to keep in mind when choosing LED strips for your bedroom. First, consider the color of the light.

Most LED strips come in either white or multicolor options. White light is more suitable for task lighting, while multicolor lights can create a more ambient atmosphere.

2. Consider the brightness of the LED strips. If you want your LED strips to provide ambient lighting, you’ll want to choose a strip that emits less light.

Conversely, if you want your LED strips to provide task lighting, you’ll want to choose a strip that emits more light.

3. Check if Your Led strips come with a controller. Many LED strips come with a controller that allows you to change the colors and brightness of the lights.

Check-if-Your-Led-Strips-Come-With-a-Controller

If your LED strip doesn’t come with a controller, you can buy one separately.

4. Decide where you want to place your LED strips. Once you’ve chosen your LED strips and controllers, it’s time to decide where to put them.

The best location for the bedroom would be on the ceiling, around the room’s perimeter. You can also place them under the bed or behind furniture.

5. Use Mounting channels for the best look. If you want your LED strips to have a professional look, you should use mounting channels.

Mounting channels are available in different sizes and can be found at most home improvement stores. They also provide diffuser covers that help to spread the light evenly and prevent hot spots.

6. Hide the wires that come from a power source. Once you’ve determined the best location for your LED strips, it’s time to connect them to a power source.

Make sure to hide the wires from the power source, so they’re not visible. You can use wire hiders, cord covers, or electrical tape to achieve this.

Can You Make LED Strips Dimmable in Bedroom?

If you want to control the brightness of your LED strip lights, you’ll need to make sure they’re dimmable. Most LED strip lights are dimmable, but it’s always a good idea to check before buying. That way, you’ll know for sure that you can get the perfect level of light for your needs.

You’ll need to use a dimmer switch to dim your LED strip lights. This is usually a separate device installed between the power supply and the lights.

Once you have a dimmer switch, you can simply adjust it to change the brightness of the lights. It’s important to note that not all dimmer switches are compatible with all LED lights.

So, if you’re not sure which switch to get, it’s always a good idea to check with the manufacturer of your lights. That way, you can be sure that you’re getting a switch that will work with your particular setup.

Where Should Led Strip Lights Be Placed in a Bedroom?

There are a few things to keep in mind when deciding where to place your LED strip lights in a bedroom. First, you’ll want to consider the purpose of the lights. If you’re using them for task lighting, you’ll want to place them in areas where you need more light.

Where-Should-Led-Strip-Lights-Be-Placed-in-a-Bedroom

For example, you might place them under the bed or behind the headboard. If you’re using them for accent lighting, you might place them around the room’s perimeter or along the edges of furniture.

Second, you’ll want to consider the location of the outlets. LED strip lights need to be plugged into an outlet, so you’ll need to make sure there’s one nearby.

Third, you’ll want to think about the design of the room. You’ll want to place the lights in a way that enhances the overall aesthetic. If your bedroom has a drop-down ceiling mount or crown molding, you might place the lights along with those features.

It’s always a good idea to make a plan before you start installing the lights. You can also get an idea of how to hang led strip lights in bedroom by reading this blog. That way, you can be sure they’re placed in the best possible location.

Can You Install LED Strips Lights on Bedroom Ceiling Corner?

Yes, you can install LED strip lights on the corner of your bedroom ceiling. This is a great way to add accent lighting to the room. It’s also a great way to save space if you don’t have a lot of room to work with.

When installing LED strip lights on the ceiling, you’ll need to use mounting channels. These channels will help to keep the lights in place and prevent them from falling down. You can find mounting channels at most home improvement stores.

Final Words

Many people think of table lamps and overhead light fixtures when it comes to bedroom lighting. But if you want to add a touch of personality and pizzazz to your bedroom, consider installing some LED strip lights.

They are affordable and easy to install, but they can also be used in a variety of different ways to create the perfect atmosphere for relaxation or romance. 

We have already provided instructions on how to hang led strip lights in bedroom. By following these simple steps, you can have your new lighting fixture up in no time!

Have you tried this project before? What tips do you have for our readers? Feel free to share them in the comments below!

Leave a Comment