How to Install Color Changing Led Shower Head

Transforming your shower experience has never been easier with a color changing LED shower head. These innovative shower heads use LED lights to create a mesmerizing display of colorful lights that change with the water temperature.

How to Install Color Changing Led Shower Head

Installing a color changing LED shower head can add a touch of excitement and modernity to your bathroom, creating a unique and immersive shower experience. In this article, we will provide step-by-step instructions on how to install color changing led shower head, allowing you to elevate your daily showers to a whole new level of sensory delight.

Are Led Lights Safe in Shower?

Yes, LED lights are safe for use in a shower as long as they are installed properly and suitable for wet conditions. Many LED lights come with waterproof ratings, and so they can handle the humidity of a shower environment without causing damage or putting you at risk of electric shock.

However, it is important to make sure that the light is securely installed using approved waterproof materials. Check the product manual for advice on how to do this safely, and be sure to get a qualified electrician for any wiring work required. If you are unsure, it is best to get professional help—your safety is more important than the cost of an installation job.

No matter what type of shower head you install, LED lights can provide ambiance and style while helping you save energy. With proper installation and maintenance, LED lighting can bring your bathroom into the future with modern design elements that will make your showering experience even more enjoyable!

10 Methods How to Install Color Changing Led Shower Head

1. Basic Screw-On Installation:

Most color-changing LED shower heads are designed to screw onto your existing shower arm. Simply unscrew your current shower head, clean the threads, and screw on the LED shower head in its place. Use a wrench or pliers to tighten it securely.

Simply Unscrew Your Current Shower Head

If your shower arm is too long, you may need to purchase an extension piece. Though it may seem intimidating, this is a beginner-friendly install and in most cases, requires no tools or extra parts. However, always make sure to check the manufacturer’s instructions before you begin.

2. Teflon Tape:

Before installing the LED shower head, wrap the threads of the shower arm with Teflon tape to create a watertight seal. This can help prevent leaks and ensure a proper installation. Start by wrapping the tape around the shower arm in a clockwise direction. Make sure that you wrap the tape three to five times to create an effective seal.

Be sure to cover the threads of the shower arm completely with tape. Once you’ve wrapped the Teflon tape around the shower arm, you can begin installing the LED shower head. To do this, simply screw the shower head onto the end of the arm until it’s firmly in place. Make sure not to over-tighten as this could damage the shower head or cause it to leak.

3. Adapter Installation:

If your shower arm does not have standard threads or if the LED shower head requires an adapter, follow the manufacturer’s instructions for installing the adapter onto your shower arm first. Then, attach the LED shower head to the adapter. Make sure to use the included Teflon tape or pipe thread compound to ensure a leak-free connection.

If your adapter has its own threads, these should be wrapped with Teflon tape or pipe thread compound as well. Tighten the connections by hand, then use an adjustable wrench to secure them. Avoid over-tightening the connectors, as this can damage the threads or the seals.

4. Universal Fit Installation:

Some LED shower heads come with a universal fit that can fit onto various types of shower arms without requiring an adapter. Follow the manufacturer’s instructions for installing the universal fit onto your shower arm, and then attach the LED shower head to the universal fit. Finally, secure the shower head with a few twists of your hand until it is tightly in place.

Secure the Shower Head With a Few Twists

While this type of installation may be simple, take caution in not overtightening the shower head as it could damage the threads. Though rare, if the shower head does not fit onto your existing shower arm you may need to purchase an adapter.

5. Hand-Held Installation:

If your LED shower head is a hand-held model, follow the manufacturer’s instructions for installing the bracket or holder onto the shower wall. Then, attach the shower head to the bracket or holder according to the manufacturer’s instructions.

Some hand-held shower heads are powered by batteries, while others require a nearby electrical outlet. Be sure to follow the manufacturer’s instructions for the type of power your model requires. While installing, make sure the connection points for the water supply and power source are secure.

6. Shower Hose Installation:

For hand-held LED shower heads that come with a shower hose, connect the hose to the shower head and the shower arm or bracket according to the manufacturer’s instructions. Make sure the connections are tight to avoid leaks.

Finally, attach the end of the shower hose to the supply line. If a diverter valve is present, ensure that it is in the correct position. A diverter valve can control the flow of water from either the shower head or a separate attachment, such as an overhead rain shower head.

7. Battery Installation:

Some color-changing LED shower heads are powered by batteries. Follow the manufacturer’s instructions for installing the batteries into the shower head, and make sure they are inserted correctly and securely. Test the shower head during installation to ensure that the lights turn on and off, or go through its various color-changing sequences.

Various Color-changing Sequences

Replace any batteries as necessary. To conserve battery life, turn off the shower head when it is not in use. To avoid damaging the shower head, do not immerse it in water. A low flow of water is needed to activate some models of color-changing LED shower heads.

8. Water Pressure Check:

Before turning on the water, check the water pressure to ensure it is within the range recommended by the LED showerhead manufacturer. Adjust the water pressure if necessary to avoid damaging the shower head or compromising its performance.

Connect the showerhead to the water line and tighten it securely. While using a wrench may seem like the quickest way to secure the showerhead, only hand tightening is necessary. Try to avoid over-tightening the showerhead, as this can cause damage to the pipes.

9. Test the LED Lights:

Once the installation is complete and the water is flowing, test the LED lights by adjusting the water temperature. The lights should change color according to the temperature of the water, as indicated by the manufacturer. For example, a shower head may turn green when the water is cold, blue when it’s warm, and red when it’s hot.

If the lights don’t change color or you see other abnormal behavior, double-check your installation and contact the manufacturer for support. With the LED lights successfully working, you’re now ready to enjoy a unique and colorful showering experience.

10. Final Adjustments:

Make any necessary final adjustments to the LED shower head, such as tilting or angling it to your desired position, according to the manufacturer’s instructions. Ensure that the LED shower head is securely mounted and all connections are secure. Finally, turn on the water to check for proper operation of the LED shower head. If it does not work properly, you may need to repeat some of the steps outlined above or consult with a professional plumber.

Some Common Mistakes When Installing Color Changing Led Shower Head

1. Not Paying Attention to Size and Shape of the Shower Head 

Make sure to measure your current shower head before purchasing a color changing LED shower head, as not all sizes/shapes are compatible with each other.

2. Not Accounting for Water Pressure 

The water pressure in your home will affect the performance of the color changing LED shower head. Make sure the water pressure is suitable for the shower head you are purchasing and that it will not be too weak or too strong to use.

3. Not Installing the Color Changing LED Shower Head Properly 

Installing a color changing LED shower head requires careful attention to detail, as even a small mistake can lead to problems such as leaks or poor performance. Follow all instructions carefully when installing your new shower head.

Installing a Color Changing Led Shower Head

4. Using Low Quality Replacement Parts 

If any parts of your color-changing LED shower head need to be replaced due to normal wear and tear, make sure they are high quality parts made specifically for this type of fixture. This will ensure the best possible performance from your shower head in the long-run.

Conclusion

In conclusion, installing a color-changing LED shower head can be a straightforward process with the right tools and instructions. Following the manufacturer’s instructions carefully, including any specific requirements for your shower head model, is crucial to ensure a proper installation.

Taking steps such as using Teflon tape, checking water pressure, and properly installing batteries (if applicable) can help avoid leaks and ensure optimal performance. Thanks for reading our blog post on how to install color changing led shower head! We hope you found it helpful and informative.

Leave a Comment