How to Put Gels on Lights

If you’re a photographer, you know that one of the most important parts of your job is to ensure that your lights are properly set up.


This means making sure they’re positioned correctly and ensuring that they’re diffused and providing the right amount of light. One way to do this is by using gels.

In this blog post, we’ll show you how to put gels on lights so that you can take your photography to the next level. Here are some tips to put gels on lights to get the job done right. So read on to learn more!

Summary: Applying gels to lights is a technique used in photography, filmmaking, and stage productions to alter the color, intensity, or temperature of the light source, creating various lighting effects and moods. To put gels on lights, first, select the appropriate gel based on the desired color or effect. Measure the size of the light source and cut the gel sheet to fit the light, leaving some extra space around the edges for securing.

Ensure that the light is turned off and cooled down before proceeding. Attach the gel to the light using appropriate mounting methods, such as clips, frames, or heat-resistant tape. Be cautious not to place the gel too close to the light source, as excessive heat may damage or melt the gel. Turn the light back on and observe the resulting effect, making any necessary adjustments to the gel’s position or angle. By correctly applying gels to lights, users can achieve a wide range of creative and dynamic lighting effects in various settings.

8 Advantages of Using Gels on Lights

1. Helps to Create a Softer Light

By diffusing the light, gels help to create a softer and more flattering light. This is especially useful when photographing people, as it can help to reduce the appearance of wrinkles and blemishes.

2. Adds Color

Gels can add color to a light, which can create an interesting effect. By adding a gel to light, you can change the color of the light, which can be used to create different moods or atmospheres. For example, if you want to create a romantic atmosphere, you could use a red gel on the light.

3. Changes Brightness

Gels can also be used to change the brightness of a light. By adding a gel to light, you can make the light appear brighter or dimmer. This can be useful to create a specific mood or atmosphere.

4. Creates Different Shadows

Adding a gel to light can also create different shadows. By changing the color of the light, you can create shadows that are different colors. This can be used to add interest and complexity to a photograph.


5. Helps to Balance Light

If you are photographing in a situation where there is a mix of different light sources, gels can help to balance the light. By adding a gel to light, you can make it match the color of the other light sources, which can help to create a more even and balanced photograph.

6. Reduces Glare

Gels can also be used to reduce glare. By diffusing the light, gels can help reduce the amount of glare present in a photograph. This can be useful if you try to take a picture of a shiny object.

7. Can Be Used to Create Effects

One fun way to use gel is to create special effects with your lights. For example, you can change the color of your light or make it look like it’s pulsing. This can add an extra level of interest to your displays or presentations.

8. Change the Atmosphere

Gels can also be used to change the atmosphere of a room. By changing the color of the light, you can create different moods or atmospheres.

For example, if you want to make a room feel cozier, you could use a warm gel. Or, if you want to make a room feel more energetic, you could use a bright gel.

What Things You’ll Need

1. Gel

2. Lights

3. Extension cord

4. Pencil or pen

5. Scissors

6. Tape measure

Instructions: How to Put Gels on Lights

Step 1: Choose the Right Gel Sheet

There are different colors of gels available on the market, so it is important to choose the right one for your light. First, you need to determine what color you want the light to be, and then find a gel sheet with the same color.


Step 2: Cut the Gel Sheet to Fit

Once you have found the right gel sheet, you need to cut it so that it will fit over your light. You can use scissors or a knife for this. Make sure that the sheet is big enough to cover the light, but not too big or it won’t be easy to manage.

Step 3: Place the Gel Sheet on the Light

Once you have cut the sheet to size, you need to place it over the light. Some lights have specific places where the gel sheet should go, so follow the instructions. If there is no specific place for the gel sheet, just put it in the middle of the light.

Step 4: Plug in the Extension Cord 

If your light is not plugged into an extension cord, you will need to do that now. Plug the cord into the light and plug the other end into an outlet. Then, turn on the light switch to see if the light is working. If it is not, you will need to troubleshoot why it is not working.

Step 5: Turn on the Light

Now it is time to turn on the light. The gel sheet will start to glow, and your light will be a different color. You can change the color of the light by changing the gel sheet. Just turn off the light before you change the gel sheet.

Step 6: Store the Gel Sheet

Once you are done using the gel sheet, you need to put it away. Make sure to store it in a safe place not to get damaged. You can also store the gel sheet in a zip-lock bag to stay clean.


These are the basic instructions on how to put gels on lights. If you need more specific instructions, you can look online or ask someone knowledgeable about this topic.

Some Tips to Create Duotone Effects With Gel Lights

1. First, you will need to find a good location with both natural light and artificial light.

2. Set up your lighting so that most light is coming from an artificial source.

3. Place your gel lights in front of the artificial light source and position them to distribute the light evenly.

4. Experiment with different colors and intensities to create the look you want.

5. Be sure to take care when handling the gel lights, as they can be fragile.

6. When you are finished, carefully remove the gel lights and store them in a safe place.

Now that you know how to put gels on lights, you can experiment with different colors and effects to create unique displays and presentations. So have fun and be creative!

Few Gel Lighting Photography Tricks & Tips

1. Always remove the gel from the light source before turning it off. This will help to prevent the gel from cracking or melting.


2. When using gels, try to keep them away from the bulbs. The heat from the bulbs can cause the gels to melt or discolor.

3. Be careful not to handle gels too roughly. They can be easily damaged.

4. If you need to clean a gel, use a gentle soap and water solution. Do not use any harsh chemicals or solvents.

5. Gels are available in a variety of colors. Experiment with different colors to see which ones work best for your photographs.

When Should You Use Gels on Lights?

Many people don’t know when to use gels on their lights. In general, you should use gels whenever you want to change the color of the light.

In addition, gels are perfect for creating different moods and atmospheres. For example, if you’re shooting a scene at night, you might want to use a blue gel to create a more spooky effect.

There are many different gels, so it’s important to choose the right one for the job. You should also ensure that the gel is the right size and shape for your light. If you’re unsure which gel to use, ask your local lighting store for advice.

Can You Make Gel Lights?

Yes, you can make gel lights! All you need is a light fixture and some gels. You can buy gels online or at your local hardware store.


Gel lights are a great way to add color to any room in your home. They are also very easy to install. Here’s how to put gels on lights:

1. Begin by removing the light bulb from the fixture.

2. Cut a piece of gel that is the same size as the light bulb.

3. Place the gel over the light bulb and reattach it to the fixture.

4. Turn on the light and enjoy your new gel light!

Frequently Asked Questions

How Do You Use Gel Lights?

Gel lights can be used in a variety of ways. They are often used as backdrops for photos or videos, as well as to add a special effect to a performance or presentation. They can also be used as part of a set design, to create an atmosphere or mood.

Can Gel Nail Polish Dry Under Led Light?

Gel nail polish can potentially dry under LED light, but it is important to take caution. LED lighting typically produces a high level of UV light, which can damage the gel polish and cause it to fade quickly. If you are using LED light to apply gel nail polish, make sure to use a protective filter over the light source to avoid damage. Additionally, make sure to wait several minutes after applying the gel nail polish before applying LED light so that the polish has time to fully dry. If you experience any problems with gel nail polish drying under LED light, please feel free to contact our customer support team for help.

What Happens if You Put Regular Nail Polish Under a Gel Light?

If you put regular nail polish under a gel light, the regular polish may become cloudy and discolored due to the light. This is because the regular polish contains oil and moisture, which will be absorbed by the gel light and will become cloudy and discolored. To avoid this problem, it is best to use a separate light for applying regular nail polish under a gel light. Alternatively, you can apply regular polish under a gel light using a special applicator that prevents the surface of the nail from being exposed to the light.

At What Distance Do You Need Gels?

the distance you need gels will vary depending on the type of gel and the application technique you are using. Generally speaking, you will need gels closer to the surface of the paint than you will farther away from the surface. Additionally, you will likely need more gels near areas that are subject to high humidity or condensation, such as around windows or doors. As a general rule of thumb, it is helpful to apply at least one gel per coat of paint, but it is always best to test a small section of the painting first to ensure that the gel is properly adhering and does not cause any adverse effects.


In conclusion, putting gels on lights is an easy way to change the color and mood of a room or make an awesome effect for photography.

It is important to select the right gel for the light and use caution when applying it to avoid any damage. You can create beautiful effects that will transform your home or event space with a little practice.

So, there you have it! A comprehensive guide on how to put gels on lights. We hope that this article was helpful and informative.

Please feel free to share any questions or comments in the comment section below if you have any questions or comments. Happy lighting!

Leave a Comment