How to Remove Emergency Light Cover

Emergency lights provide an important source of light in the event of a power outage or other emergency. If you have ever gone through an emergency situation, then you know how critical it is to have dependable lighting.

To ensure that your emergency lights are working correctly, they must be serviced and maintained at least once per year. Part of this maintenance includes removing the emergency light cover in order to inspect and clean the fixture.

How to Remove Emergency Light Cover

Removing an emergency light cover can provide several advantages. Removing the emergency light cover, it enables service personnel to access and repair or replaces components within the emergency lighting fixture more easily. It also allows for easier cleaning of dust and debris that can accumulate in the fixture over time. In this blog post, You will learn in detail how to remove emergency light cover.

Tools You Will Need

  • Screwdriver
  • Pliers
  • Socket wrench
  • Hammer
  • Flathead screwdriver
  • Crowbar
  • Needle nose pliers
  • Paint scraper
  • Utility knife
  • Wire cutters.

Once you have collected all of the necessary tools, it is time to begin removing your emergency light cover.

Step by Step Processes for How to Remove Emergency Light Cover

Step 1: Inspect the Emergency Light Fixture

Before beginning the process of removing the cover, inspect the emergency light fixture. Check that all components are securely fastened and there is no damage to any of the parts. When dealing with electrical equipment, it is important to turn off the power supply before attempting to remove anything. This will ensure that you do not get shocked during the process.

Inspect the Emergency Light Fixture

Step 2: Remove Outer Cover

Once you have inspected all of the components and shut off the power supply, you can begin to remove the outer cover of the emergency light fixture. To do this, use a screwdriver to unscrew all of the screws that are holding it in place.

Step 4: Dismantle the Fixture

After you have removed the outer cover, you will be able to identify and dismantle all of the components inside the emergency light. This includes things such as screws, wires, and circuit boards.

Carefully unscrew each part in order to remove them from the fixture. Carefully remove the bulb from the fixture. This can be done by unscrewing it from its base or by carefully pulling it out of its socket.

Step 5: Remove Outer Cover Plate

The outer cover plate is usually held in place with screws. Unscrew all of these screws and carefully pull off the cover plate. After the outer cover plate is removed, you will need to unscrew and then remove the inner cover plate. This part of the fixture holds all of the wiring in place.

Step 6: Disconnect Connectors

Once you have taken off both cover plates, you can begin to disconnect the electrical connectors. To do this, you will need to unscrew each one in order to remove them from the fixture. The circuit board is usually held in place with screws. Unscrew all of these screws and carefully pull off the circuit board.

Disconnect the Electrical Connectors

Step 7: Replace Cover

After all of the components have been removed, you can begin to put everything back together. Begin by replacing the cover plates and then screwing them in place. Finally, replace the outer cover and secure it with screws.

Now that you know how to remove an emergency light cover, you will be able to make repairs or upgrades to the fixture with ease. Be sure to always shut off the power supply before attempting any repairs and never attempt to do anything you are not comfortable with.

Safety Tips for How to Remove Emergency Light Cover

  1. Ensure that the power is turned off and unplugged before attempting to remove the emergency light cover.
  2. Wear protective gear such as gloves, goggles, and a dust mask when handling and removing the emergency light cover.
  3. Examine the emergency light to identify any screws that may be holding it in place.
  4. Use an appropriate tool to unscrew and remove the screws. Be careful not to lose any of the small parts.
  5. Gently pull down on the cover and slowly work it off until it is removed from the light fixture. Do not force it off as this may damage the emergency light or its components.
  6. Dispose of the cover according to manufacturer directions and local regulations.
  7. Check for any other parts or debris that may have been hidden under the emergency light cover and discard them as well.

These safety tips will help you safely and efficiently remove an emergency light cover so you can properly inspect and maintain your lights. Be sure to follow all manufacturer instructions for the best results.

Are There Any Risks That You Should Be Aware of When Removing Emergency Light Cover?

Yes, there are certain risks that you should be aware of when removing emergency light cover. Before attempting to remove a cover from an emergency lighting system, make sure the power is off and the lights are disconnected from any live power sources. It’s also important to take extra care when removing covers as these units may have sharp edges or glass fragments that could potentially cause injury.

Remove a Cover From an Emergency Lighting System

Additionally, many emergency light covers are secured in place with screws so make sure you have the correct tools to safely remove them before attempting to do so. It’s also important to wear protective gear such as gloves and safety glasses when handling these units.

Lastly, once you’ve removed the cover be sure to properly dispose of it and never attempt to re-install it. Removing an emergency light cover is not a difficult task when done safely but always make sure you take the necessary precautions before beginning work.

Is There Any Maintenance That Needs to Be Done After the Emergency Light Cover is Removed?

After the cover has been removed from your emergency light, it is important to check that all internal components are in good working order and have not been damaged during the removal process. Make sure to inspect the battery system, wiring connections, and other related parts for any signs of wear or damage. You may need to replace any worn-out or defective parts as necessary.

It is also important to clean the area where the emergency light cover was removed, and make sure that no metal shavings or dirt have been left behind. Make sure the area is completely dry before putting the cover back in place.

Finally, check all connections and reassemble the components of your emergency light for proper functioning. By properly maintaining your emergency light after the cover is removed, you can ensure its long-term effectiveness and reliability. Regular maintenance of emergency lights is essential for safety in the event of a power outage or other emergency situation.

Are There Any Special Steps That Need to Be Taken if the Emergency Light Cover is Damaged or Corroded?

If the emergency light cover is damaged or corroded, you may need to take extra steps in order to safely remove it. First, carefully inspect the cover and its mounting hardware for signs of corrosion or damage. If you notice any significant wear and tear, replace the parts before attempting to remove them.

Additionally, use an appropriate lubricant such as silicone spray or lubricating oil, to make it easier to loosen the mounting screws.

Taking these extra steps can help ensure that you remove the cover without causing any further damage. Once all of the screws are removed, carefully pull the cover off of the light and discard it.

Make sure to use caution when removing a corroded or damaged emergency light cover, as there may be sharp edges or other hazards present. With the right tools and safety precautions, however, you can successfully remove an emergency light cover with ease.

Is It Necessary to Hire Any Professional to Remove Emergency Light Cover?

It depends on the type of emergency light cover you have and the complexity of removing it. If your emergency light cover is secured with screws, then you may be able to remove it yourself without any help from a professional.

However, if your emergency light cover is surface mounted or has wiring attached to it, then you should hire a licensed electrician to come and remove the cover for you. An electrician will be able to safely and properly disconnect the wiring and any other components attached to the emergency light in order to remove it.

They will also be able to provide advice on how to reinstall your emergency light cover if necessary. In addition, there are some safety considerations when removing an emergency light cover. Emergency lights are designed to provide illumination and visibility during power outages or other emergencies, so it is important that you take the proper steps to ensure that your light is properly installed and functioning correctly.

Reinstall Your Emergency Light Cover


One of the primary disadvantages of removing an emergency light cover is that it can potentially disable the light or its function. If a cover is not properly re-installed, the device may not work correctly and may fail to activate during an emergency situation.

Additionally, since many emergency lights are permanently mounted to walls or ceilings, attempting to remove a cover may cause damage to the wall or ceiling.

In conclusion, knowing how to remove an emergency light cover is important if you need to access the inside of it. It may be necessary for repairs, maintenance, or inspection purposes. This process involves turning off the power supply and using a flathead screwdriver or Phillip’s head screwdriver to unscrew the cover.

Protective eyewear and gloves should also be worn for safety. I hope this article has been beneficial for learning how to remove emergency light cover. Make Sure the precautionary measures are followed chronologically. 

Leave a Comment