All DIYers out there or people who like to save a buck will love this blog post! Today, we will show you how to change bulb in flush mount ceiling light.
This is a really simple process and can be completed in just a few minutes. If you have a flush mount ceiling light, the process is a little different from changing a standard light bulb.
So, whether your light is burnt out and needs to be replaced, or you are just looking to switch up the look of your room, keep reading for instructions on how to do it yourself!
What Is A Flush Mount Ceiling Light?
A flush mount ceiling light is a lighting fixture mounted directly to the ceiling without any exposed hardware. These fixtures are often used in hallways, bedrooms, and other low-ceilinged rooms where a standard chandelier or pendant light would not be appropriate.
Most home improvement stores carry a variety of flush mount fixtures in different styles to suit any taste. Flush Mount Ceiling Light typically has a light coverage of 160 degrees or less and an IP rating of 44 or higher.
This makes them a great option for use in damp areas, such as bathrooms, kitchens, and laundry rooms. But the most difficult part of changing a ceiling flush light is getting to the actual bulb.
What Tools & Materials You’ll Need to Change Bulb in Flush Mount Ceiling Light?
- A ladder
- A screwdriver or drill (depending on how your fixture is attached to the ceiling)
- A new light bulb ( LED light bulbs are a great energy-saving option!)
- Duct Tape (optional)
Step by Step Process: How to Change Bulb in Flush Mount Ceiling Light
Step 1: Turn Off the Power to the Fixture.
This is probably the most important step in the process. Before you do anything, make sure that the power to the fixture is turned off. To do this, locate the circuit breaker box in your home and flip the switch for the room that you will be working in.
If you are not comfortable working with electricity, don’t hesitate to get in touch with a professional electrician to do this step for you.
Step 2: Bring Up Your Ladder.
Next, you will need to bring your ladder into the room so that you can reach the light fixture.
You may need to rent or borrow a taller ladder if you have a tall ceiling. Be sure to set up your ladder in a safe and secure location before climbing it.
Step 3: Locate the Screw.
Now it’s time to take a look at the light fixture itself. First, there will be a small screw or knob holding the glass globe in place.
In some cases, there may be two screws. Use your screwdriver or drill to loosen and remove this screw (or screws).
Step 4: Turning the Screw Clockwise.
As you remove the screw, you will need to hold onto the glass globe. In some cases, the globe may be attached to the fixture by a chain.
If this is the case, simply detach the globe from the chain. Then, twist it counterclockwise once the globe is loose until it comes off completely.
Step 5: Remove the Glass Globe.
Once the screw (or screws) has been removed, you should be able to pull the glass globe away from the fixture gently. If it is stuck, try wiggling it back and forth until it comes loose. Be careful not to drop the glass globe, as it could break.
Step 6: Wait for the Light Bulb to Cool Down.
Before removing the old light bulb, you will need to wait for it to cool down. Touching a hot light bulb can cause serious burns, so it is important to be patient and let the bulb cool completely before proceeding.
When the light bulb is cool to the touch, gently twist it counterclockwise until it comes loose from the socket.
Step 7: Twist the Bulb With Duct Tape.
If the light bulb is difficult to remove, you can try using duct tape. Wrap a small piece of duct tape around the light bulb’s base and twist it counterclockwise. The duct tape will help grip the bulb and make it easier to remove.
Step 8: Remove the Old Light Bulb.
Once the old light bulb is loose, carefully pull it out of the socket. Be careful not to touch the glass portion of the bulb, as this could cause it to break. If the light bulb is broken, be sure to clean up any glass fragments before proceeding.
Step 9: Clean the Socket.
Once the old light bulb has been removed, take a moment to clean the socket. Use a soft cloth or paper towel to wipe away any dirt or dust that has accumulated over time. Be sure to check the contact points as well, as they can sometimes become corroded.
Step 10: Insert the New Light Bulb.
Now it’s time to insert the new light bulb into the socket. Gently twist the bulb clockwise until it is snug.
Do not overtighten, as this could cause the bulb to break. If you want, you can use a piece of duct tape to secure the light bulb in place.
Step 11: Reattach the Glass Globe.
Once the new light bulb has been inserted, it’s time to reattach the glass globe. Line up the screw holes with the ones on the fixture and gently twist the globe clockwise until it is snug.
After you have replaced the globe, be sure to turn on the power to the fixture and test the new light bulb.
Step 12: Test on the New Light Bulb.
Finally, test the new light bulb once you have replaced the globe and turned on the power to the fixture. If it does not work, double-check that the bulb is snug in the socket and that the power is turned on.
If the light bulb still does not work, you may need to call an electrician. Replacing a light bulb in a flush mount ceiling light fixture is a simple task that can be completed in just a few minutes.
With a screwdriver and a new light bulb, you can have the fixture up and running in no time. Just be cautious when working with electricity, and always consult an electrician if you are unsure of what to do.
Some Safety Precautions & Advice
1. Always turn off the power to the fixture before beginning any work.
2. Be careful not to touch the glass portion of the bulb, as this could cause it to break.
3. Before removing the light bulb, put on a pair of latex or rubber gloves.
4. Have a rag or towel handy to catch any falling pieces if the bulb breaks.
5. If the light bulb is broken, clean up any glass fragments before proceeding.
6. Use a soft cloth or paper towel to wipe away any dust or debris from the light bulb before removal.
7. Make sure that someone is holding your ladder steady while working on the ceiling light.
With these safety measures in mind, you are now ready to change your flush mount ceiling light bulb.
Changing Bulb in Flush Mount Ceiling Light for Different Scenarios:
Screw Mounted Light Cover
The first step is to remove the light cover. To do this, unscrew the screws holding the cover in place. Be sure to put these screws in a safe place, so you don’t lose them! With the cover off, you will now see the light bulb and socket.
Unscrew the old bulb and screw in the new one. Be sure to screw it in tightly, so it doesn’t come loose and fall out. Finally, replace the light cover and screw it back into place.
Clip Mounted Light Cover
Changing a bulb in a clip-mounted light cover is similar to that of a screw-mounted light. First, remove the light cover by unscrewing it or clipping it off.
Next, remove the old bulb and insert the new one. When removing the clip-mounted light cover, be careful not to damage the ceiling.
Notched Light Covers
Some flush mount light covers are notched to be removed without taking the entire fixture down. This fixture doesn’t have any screws holding the cover in place.
Instead, they have small metal clips or latches that hold the glass in place. To release these notched covers, simply push up on the bottom edge of the glass, and it should pop right off.
These are the easiest flush mount light cover types to change the bulb in. But the difficult part is to actually locate the clips or latches holding the glass in place. Once you find them, the rest is easy.
Spring Loaded Covers
These covers are hinged on one side and are attached to the light fixture with a clasp or screw on the other side. The clasp or screw may be difficult to find, so look closely. If you see a small hole, the screw is located.
Once you unscrew it, the cover should pop open. You may need to use a flathead screwdriver to pry it open if it is stuck. After you’ve loosened the screw or opened the clasp, gently pull down on the cover. The bulbs are located inside and can now be changed.
Changing a light bulb in a flush mount ceiling light may seem daunting, but with the right tools and some patience, it can be done relatively easily.
In this blog post, we have provided you with step-by-step instructions on how to change bulb in flush mount ceiling light and tips for making the process easier.
So whether your lightbulb has burned out or you are looking to upgrade to a new style of the bulb, follow these simple steps, and you’ll have your light fixture shining brightly again in no time!
We hope you found this guide helpful and that it has demystified the process of changing a light bulb in a flush mount ceiling light. Have any questions or comments? Let us know in the comments section below!