How to Change Bathroom Ceiling Light Bulb

If you’re looking for an excellent DIY project, changing your bathroom light bulb may be just the thing. It’s easier than it looks, though some little tricks will make the process go much smoother.

The first step is to turn off the power to the ceiling light by flipping off its breaker in an electrical panel or turning it off at its switch on your wall.

How-to-Change-Bathroom-Ceiling-Light-Bulb

Next, you’ll need to remove the cover plate over where the light fixture screws into place with either a screwdriver or nut driver depending on what type of fixture you have.

Once you’ve removed this cover plate, unscrew and take out any wire connectors that might still be in place to get access to all of the wiring between the power source and light bulb.

Now, you’re ready to remove the old light bulb. Read on to know more briefly about how to change bathroom ceiling light bulbs.

8 Reasons to Change Bathroom Ceiling Light Bulb

1. To Increase Brightness: It’s no secret that changing a light bulb can brighten up a room.

For example, if your current light bulbs are 25 W and you replace them with 10 W bulbs, your new bulbs will emit about 50% more light than the old ones.

2. To Prevent Overheating: If your bathroom ceiling light fixture doesn’t have appropriate venting, it can cause the light bulb to overheat. This will result in faster burn-out of the bulb and increase your energy costs.

3. To Prevent Fires: Kids are known for being curious about everything – including bathroom lighting fixtures.

Unfortunately, many children have been injured or even died by touching an electrical fixture while standing in a bathtub.

4. To Increase Efficiency: Since most bathroom fixtures are recessed, the underside is dark and partially hidden from view.

As a result, many homeowners don’t even bother to clean that area of their bathroom ceiling light fixture.

To-Increase-Bathroom-Light-Efficiency

A regular cleaning regimen can help you reduce your lighting bill up to 20% per year by allowing more natural light in.

In addition, if you have an older light fixture, replacing it with a newer model can increase your lighting efficiency up to 50%.

5. To Increase Home Value: A fresh new look is all some homeowners need to instantly feel as if they’ve moved into a different home.

Whether you plan to sell or stay put, changing the bathroom ceiling light fixture can be a simple way to increase your home’s value dramatically.

6. To Redecorate Bathroom Interior: Bathroom ceiling light fixtures were once reserved for homes with high-end interior designs.

However, more and more homeowners are opting to update their bathroom lights with a sleek appearance that complements the whole bathroom interior design.

7. To Eliminate Glare: If your current ceiling light fixture shines into your eyes, consider replacing it with a lamp that emits no glare at all. A famous example of this type of bathroom lighting is a goose-neck design vanity lighting.

Eliminate-Glare-of-Bathroom-With-Vanity-Lighting

8. To Increase Life Span: It’s common sense that using a bulb that emits a higher wattage will burn the filament faster than a lower-watt bulb, in most cases causing it to fail within weeks or months of installation.

When you’re trying to choose the correct light bulbs for your bathroom ceiling light fixture, remember that it’s always better to err on the side of caution.

6 Steps on How to Change Bathroom Ceiling Light Bulb

Here are some step-by-step guides to follow on how to change bathroom ceiling light bulbs.

Step 1: Find your new light bulbs

This is a very important step as different light bulbs have different wattages, which means the instructions for each one will vary.

The wattage for your bulb should be written on the packaging. It is always a good idea to read through all of the instructions before starting a project like this if you need special tools or safety equipment.

Step 2: Turn off the power

Before you go any further, make sure that there is no electricity going beyond where your light bulb was, you do this by turning off the circuit breaker.

The way to do this will be different for different homes, so you should check around your house and see what turns off power where you are working.

Turn-Off-the-Power

It is always a good idea to have someone help you with this step, but if not, it can be done alone as well.

Step 3: Remove the cover

To get up to the light bulb, you are going to have to remove the cover. This will vary depending on your fixture.

So here are some general instructions for how to do this, but do not stop reading; you should always read your fixture’s specific instructions. But, again, these are just general instructions.

To remove the cover, look under where your bulb goes for screws holding it in place. Remove these and take off the cover.

Be careful when removing this as you do not want to drop anything or make any of the wirings in your lighting unstable if you can avoid it.

Step 4: Change out the light bulb

There are a few different ways to take out the light bulb. If you have a screw-based fixture or an Edison Screw (E27) style socket, simply turn it counterclockwise, and it should come right out.

Some other fixtures have a bayonet lock, so in this case, just push down on the locking tab while turning in a counterclockwise motion.

Step 5: Put the new light bulb in

Insert your new light bulb into the socket by simply pushing it in and turning it clockwise till it locks into place, test to see if it’s secure before continuing.

Insert-Your-New-Light-Bulb

You do not need to tighten this as much as possible; instead, give it a small quarter-turn, maybe even a half-turn.

Step 6: Finishing up

To replace your cover, turn the power back on and put it back on by following the instructions in reverse order to make sure that everything is lined up before you try to screw it into place.

After that, you can go ahead and push your light switch and see that you have successfully changed your light bulb.

7 Common Mistakes to Avoid When Changing Bathroom Ceiling Light Bulb

1. Using an Old or Damaged Bulb is Unsafe

When you change the light bulb in your bathroom ceiling, it’s always safe to use the new one. Unfortunately, many people are tempted to use a bulb that doesn’t work because they have another of the same type.

It may be tempting, but it’s not worth the risk. A damaged bulb can break and send glass flying as it heats up. This is a fire hazard as well as dangerous to you and your family.

2. A Loose Light Fixture or Bulb May Fall

When you remove the old light bulb from your bathroom ceiling light fixture, be sure that the new one is nice and snug.

Securely-Fit-the-Bulb-in-the-Light-Fixture

If it’s not, you could have a dangerous accident. Also, ensure that the new bulb is securely in place, so no accidents happen.

3. Forgetting to Turn Off the Power

This is another common mistake when people are replacing bathroom ceiling light bulbs.

Remembering to turn off electricity before beginning work is vital because any electrical current running through the light fixture or ceiling can be deadly.

If you have any doubts about turning off the power, call an electrician to help before replacing a bulb.

4. Pulling Too Hard on Wires

It’s easy to get caught up in the excitement of your new bathroom ceiling light bulb and forget that there is wiring involved with changing light bulbs.

Make sure you aren’t trying to pull the wires through the ceiling and that your fixture’s wires are connected before turning on the electricity again.

5. Leaving Exposed Wiring Unattended

When you are finished changing the bulb in your bathroom, ensure no exposed wiring is left behind.

An exposed wire without its insulation can cause a short circuit or fire if it comes in contact with another wire.

It can also be a danger to you and your family, especially if they try to do something involving water, like brushing their teeth.

6. Buying the Wrong Type of Bulb

Call a professional if you’re not sure what type of bulb is best for your bathroom ceiling light fixture. Just because you have one of a certain type doesn’t mean that other light bulbs won’t cause problems with the fixture.

Buying-the-Wrong-Type-of-Bulb

The wrong bulb can create issues or even damage to your home’s wiring or electrical system. Be sure you’re using the right kind for your needs and desires to avoid any potential dangers.

7. Not Paying Attention to the New Bulb

Sometimes you might not think about changing your bathroom ceiling light bulb because it still seems to be working just fine.

However, older bulbs lose their brightness and efficiency over time and can cost more than newer ones. Also, for safety reasons and to save electricity, you should change the old ones.

When you’re trying to change bathroom ceiling light bulbs, try not to make mistakes that can be dangerous for your family or damage your home’s wiring or electrical system.

Instead, use some common sense, some caution, and pay attention to what you are doing so everything goes smoothly. You’ll appreciate it in the end!

Conclusion

The most important thing to remember is that the bulb should be screwed in tightly. This will ensure the safety and proper functioning of your light fixture.

Use pliers or even gloves if you find it difficult to unscrew or screw in a new bulb. It’s best not to do this by hand if there are any sharp edges on the metal screws holding the old bulb in place.

And don’t forget that changing out just one bathroom ceiling light can make an entire room feel more inviting!

Of course, you’ll want to take care when installing your new LED light bulbs, so they last as long as possible without prematurely burning out due to heat damage from being too close together with other LEDs in fixtures like recessed lights.

We hope now you have some idea about how to change bathroom ceiling light bulb. Let us know your thoughts in the comment section below!

Leave a Comment