How to Install Neon Lights on Wall

Installing neon lights on walls is a great way to light up a dark area and add some extra personality to your space. In this blog post, we will show you how to install neon lights on walls.

How-to-Install-Neon-Lights-on-Wall

We will provide you with a step-by-step guide on how to do this, as well as some tips and advice on how to get the most out of your neon light installation.

So, whether you are looking to add a touch of brightness to your home décor or want to create an eye-catching centrepiece for your party, read on for all you need to know about installing neon lights on your wall!

What Supplies You’ll Need?

Before you get started on your neon light installation, there are a few supplies that you’ll need to gather. Here is a list of everything you’ll need:

  • Neon lights
  • Tape measure
  • Marker or pencil
  • Power Drill
  • 3/4 inch drill bit
  • Mounting Screws
  • Wire strippers

Step by Step Guide: How to Install Neon Lights on Wall

Step 1: Choose the Desired Location.

First, you’ll need to decide where you want to install your neon lights. When choosing a location, remember that the wall surface should be smooth and even.

Avoid any areas with texture or bumps, making it difficult for the lights to adhere properly. Once you have chosen the perfect spot, use a tape measure to determine the area’s dimensions.

Step 2: Mount the Lights with Clips & Hooks.

After you have your desired location and measurements, it’s time to start mounting the lights. Most neon light kits will come with clips or hooks that can be used to attach the lights to the wall.

Mount-the-Lights-with-Clips-&-Hooks

For this step, simply follow the instructions with your light kit. Once the lights are mounted, use a marker or pencil to make a small mark on the wall next to each light.

Step 3: Trace the Outline.

Once you have made a small mark next to each light, it’s time to start tracing the outline of the design. To do this, simply use a long piece of string or twine and tie one end around the first light.

Then, holding the other end of the string taut, trace along the wall to create a continuous line. When you reach the last light, cut the string and tie it off.

Step 4: Take the Lights Away.

Now that you have a clear outline of where the lights will go, it’s time to take them down. This is important because it will make drilling the holes much easier.

As you have outlined the entire design, make sure to take note of where each individual light will be placed. If you think your marking location isn’t accurate enough, you can use a ruler or level to ensure the lines are perfectly straight.

Step 5: Drill the Holes.

After you have taken the lights down and noted where each one will go, it’s time to start drilling holes. Start drilling holes along the traced line using a power drill and a 3/4 inch drill bit.

Drill-the-Holes

When you reach the end of the line, go back and drill a hole in each space where a light will be placed. Carefully screw the mounting screws into each hole and ensure they are tight.

Step 6: Attach the Neon Lights.

Now that you have drilled all the holes and screwed in the mounting screws, it’s time to start attaching the lights.

First, thread the wire through each light and screw it in place. Once all of the lights are attached, use wire strippers to strip away any excess wire.

Step 7: Hang the Lights Up.

After you have attached all of the lights, it’s time to hang them up! Start with the first light, screw it, and then attach the wire.

Make sure to leave enough slack in the wire to maneuver the lights into place easily. Repeat this for each light until the entire design is hung on the wall.

Step 8: Connect the Power Plug.

The final step is to connect the power plug and turn on your lights! Take the wires from the power plug and twist them around the screws on the back of each light.

Connect-the-Power-Plug

Ensure the wires are tight, so they don’t come loose. Finally, screw in the neon light bulb and turn on the power switch.

And there you have it! Now you know how to install neon lights on your wall. Just follow these simple steps, and you’ll be basking in the glow of your new décor in no time.

Additional Tips and Advice:

1. If your neon lights have a backboard attached to them, ensure they are secure before hanging the lights up.

2. Make sure to use the proper drill bit when drilling holes into your wall. A 3/4 inch drill bit is the standard size for most neon light kits.

3. Be careful not to over-tighten the screws when attaching the lights to the wall. This can damage the lights.

4. When running the power cord for your neon lights, be sure to use electrical tape to secure it in place. This will prevent any accidents from happening.

5. To make your mark more noticeable, you can use a quality marker or painter’s tape to create a border around the light. This will also help to keep the area clean while you are working.

6. Don’t connect the lights to power before attaching them to the wall. This can cause yourself or the lights to be electrocuted.

7. When installing the lights on brick or concrete walls, make sure to use masonry anchors. These will provide a secure hold for the lights.

8. If you use an adhesive to attach the lights to the wall, ensure that it is rated for use on neon lights. Some adhesives can damage the lights.

How Do You Install Led Neon Signs?

Led neon signs are one of the most popular ways to decorate your home or office. They’re inexpensive, easy to install and add a touch of class and sophistication to any space.

How-Do-You-Install-Led-Neon-Signs

But before you can enjoy the beauty of your new sign, you need to know how to install it properly. Of course, you can install led neon signs yourself, but it’s always best to hire a professional to do the job for you.

The first step in installing your new sign is to find a suitable location. Next, you’ll need to consider the size of the sign and the amount of space you have available.

Led neon signs come in all shapes and sizes, so it’s important to find a large spot to accommodate the sign without being too intrusive.

Once you’ve found the perfect location, you’ll need to mark the area where you’ll be mounting the sign. Again, it’s important to use a level when marking the area to ensure that your sign is mounted evenly.

Conclusion

Installing neon lights on your wall can be a fun and easy way to make your home stand out. However, when installing neon lights on a wall, it is important to consider the electrical wiring.

The wires should be placed between the wall studs so that they are well-supported. It is also important to use a wire stripper to remove the insulation from the end of each wire before attaching them to the light fixture.

If you do not have any experience with electrical work, it may be best to consult with a professional electrician. By following the simple steps in this article on how to install neon lights on wall, you can have your neon light up and running in no time.

Be sure to follow all safety instructions in your neon light kit to avoid accidents. If you have any questions or concerns, contact the experts at your local hardware store. They will be more than happy to assist you.

Leave a Comment