Do you have a high ceiling in your home? If so, you may be wondering how to change the light fixture. Changing a light fixture can be a daunting task, but it’s not as difficult as it may seem.
In most cases, changing a high ceiling light fixture is similar to changing a low ceiling light fixture. However, there are some specific considerations to consider when replacing a high ceiling light fixture.
This article will walk you through the process of how to change high ceiling light fixture safely and efficiently. So Keep reading to learn more!
What Things You’ll Need?
1. A stepladder
2. A screwdriver
3. A new light fixture
4. Wire strippers
5. Electrical tape
6. Safety glasses
Step by Step Guide: How to Change High Ceiling Light Fixture
Step 1: Make Sure the Power Is Turned Off.
Before doing anything, make sure the power is turned off to the light fixture you’re replacing. There are a few ways to do this, but finding the breaker box and switching off the circuit breaker for the light fixture is easiest.
Step 2: Remove the Old Light Fixture.
Once the power is off, you can remove the old light fixture. This will usually involve removing some screws from the ceiling and then down the fixture. Again, be careful not to damage the wires while doing this.
Step 3: Strip the Wires.
Next, you’ll need to strip the wires to be attached to the new light fixture. There are a few ways to do this, but the easiest is to wire strippers. Just make sure you strip the same amount of insulation from each wire.
Step 4: Connect the Wires.
Now, it’s time to connect the wires. This will usually involve twisting the wires together and then using electrical tape to hold them in place. Just make sure you’re connecting the right wires.
Step 5: Attach the New Light Fixture.
Once the wires are connected, you can start attaching the new light fixture. This will usually involve screwing it into place on the ceiling. Be careful not to overtighten the screws, as this could damage the fixture.
Step 6: Turn on the Power.
Once the new light fixture is in place, you can turn on the power and test it out. Just make sure to flip the breaker switch back on, and then you should be good to go!
And there you have it! Now you know how to change a high ceiling light fixture. Just follow these steps, and you’ll be able to do it yourself in no time.
Some Helpful Tips and Advice:
1. Make sure to use a ladder when changing a high ceiling light fixture. It’s not safe to try to do this from a standing position.
2. Be careful not to damage the wires while removing the old light fixture.
3. Make sure to strip the same amount of insulation from each wire before connecting them.
4. Be careful not to overtighten the screws when attaching the new light fixture.
5. Always test the new light fixture before you leave the area.
6. If you’re not comfortable working with electricity, it’s best to hire an electrician to do this job for you.
Five Ways on How to Change High Ceiling Light Fixture
1. Use a Stepladder
This is the most common and safest way to change a high ceiling light fixture. You will need a tall stepladder rated for your weight, and that can fit comfortably under the ceiling fixture. Be sure to follow all safety instructions when using a stepladder.
2. Use an Extension Ladder
If you don’t have a stepladder that is tall enough, you can use an extension ladder. This option is more dangerous than using a stepladder, so follow all safety instructions when using an extension ladder.
3. Use a Chair
If you don’t have a stepladder or an extension ladder, you can try using a chair. Be sure to choose a sturdy chair that is rated for your weight. Place the chair underneath the ceiling fixture and climb up carefully.
4. Using Bulb Grabber
If you don’t want to climb up a ladder or chair, you can use a bulb grabber to change the light fixture. This tool allows you to safely reach the light fixture without having to climb up anything.
5. Hire a Professional
If you are uncomfortable changing the light fixture yourself, you can always hire a professional to do it for you. This is the most expensive option, but it will ensure that the job is done safely and correctly.
Few Things to Consider When Changing High Ceiling Light Fixture
1. Type of Bulb You Will Use
When changing a high ceiling light fixture, you need to consider the type of bulb you will use. The most common bulb used in high ceiling fixtures is a floodlight bulb. However, other bulbs can be used, such as a track light bulb or a spotlight bulb.
2. The Shape of the Fixture
The fixture’s shape is also important to consider when changing a high ceiling light fixture. The most common shapes are round, square, and rectangular. However, other shapes can be used, such as oval or octagonal.
3. The Size of the Fixture
This is probably the most important factor when choosing a new light fixture. The size of the fixture should be in proportion to the size of the room and the height of the ceiling.
A general rule of thumb is that a chandelier should be about one-half to two-thirds the width of the dining table. For ceilings higher than 8 feet, add 3 inches to the chandelier width for each additional foot of ceiling height.
4. The Wattage of the Bulb
The wattage of the bulb is also important to consider when choosing a new light fixture. A higher wattage bulb will use more energy and produce more heat than a lower bulb.
Therefore, a good rule of thumb is to choose a light fixture with a bulb with the same or less wattage than the bulbs currently in the fixture.
5. Whether You Need a Specialty Bulb
If you are using a specialty bulb, such as a track light bulb or a spotlight bulb, you will need to purchase a new light fixture specifically made for that type of bulb. In addition, speciality bulbs require different types of sockets and connectors than standard bulbs.
What Are the Advantages of Having High Ceiling Light Fixture?
There are several reasons why you might want to change your high ceiling light fixture. One of the biggest advantages is making a room feel bigger and more open. Additionally, a high ceiling light fixture can be a great way to showcase a beautiful chandelier or another piece of artwork.
By installing a high ceiling light fixture, you can significantly reduce your energy costs since they are much more efficient than traditional light fixtures. If you consider changing your high ceiling light fixture, there are a few things you should keep in mind.
First, make sure that you measure your ceiling height before you purchase a new fixture. Second, be sure to select a fixture that is appropriate for the size and style of your room.
Finally, consider hiring a professional to install your new fixture if you are not confident in your ability. With a little bit of planning, you can easily change your high ceiling light fixture and enjoy the many benefits.
Changing a high ceiling light fixture can be daunting, but with the right tools and some patience, anyone can do it. Here we have given you the steps you need to change that high ceiling light fixture.
You will need a ladder or step stool, screwdriver, wire strippers/pliers, electrical tape, new light fixture, and wire nuts. With the right tools and some patience, you can have your new light fixture up in no time.
We hope this blog post on how to change high ceiling light fixture has been helpful. Have any questions about changing a high ceiling light fixture? Leave them in the comments below and we’ll help you out.