How to Fix Red Light on Outlet

Do you find yourself in a bone-chilling panic every time your outlet’s red light won’t switch off? A red light on an outlet can be one of the most concerning sights for homeowners. Relax — it is much easier to solve than you think. You can try resetting the breaker or replacing the outlet altogether and see if either fix works for your problem.

How to Fix Red Light on Outlet

In this blog post, we will explore both of these solutions in greater detail so that you can get back to taking care of all of your electronic devices with peace of mind! It’s important to know how to fix red light on outlet, both quickly and safely.

Benefits of Red Light on Outlet

1. Can be Used as an Indicator

It’s not all bad news: there are some benefits to having a red light on your outlet. A red light is often used as an indicator of a functioning GFCI outlet, which provides you with additional protection from electric shock and fire hazards. Without the presence of a red light, it is difficult to determine if an outlet is working properly and providing you with the necessary level of protection.

2. Ease of Use

Having a red light on your outlet also makes it easier to use than an outlet without one. Red lights are usually located directly above the outlets so that they can be easily seen and identified from far away. This allows you to identify which outlets are powered up and which ones are not, without having to go up closer and inspect each one individually.

Required Items to Fix Red Light on Outlet

Before you can begin, there are some items that you will need to have on hand in order to fix the red light on your outlet:

  • Voltage tester
  • Screwdriver or drill
  • Wire stripper/cutter
  • GFCI outlet (if needed)

Once you have all of the necessary items, you can proceed with your repair.

10 Instructions on How to Fix Red Light on Outlet

Now that we’ve gone over the benefits of having a red light on your outlet, let’s discuss how to fix it. Here are 10 steps for fixing the red light on your outlet:

1. Turn Off the Power

Make sure the power is off! Use a voltage tester to confirm that there is no electricity running through the wires before you begin. This is an extremely important safety precaution and should not be skipped.

Use a Voltage Tester to Confirm

2. Unscrew the Plate

Once the power has been turned off, you can begin to unscrew the plate that covers the outlet. Typically, these plates will be held in place with two screws that are located on either side.

3. Check for Damage

Once the plate has been removed, inspect the outlet for any signs of damage. Check to make sure that all wires are connected properly and securely in place with no loose or frayed ends.

4. Resetting the Breaker

If there is no visible damage, resetting the breaker is a good first step in attempting to fix your red light problem. To do this, locate the fuse box and select the breaker that corresponds to your outlet. Flip it off and then on again quickly to reset it.

5. Replace Outlet

If resetting the breaker does not solve the problem, you may need to replace the outlet altogether. To do this, turn off the power at the fuse box and use a screwdriver or drill to remove the screws that hold the outlet in place.

6. Remove Wires

Next, you will need to remove all of the wires from the outlet. Use a wire stripper/cutter to do this carefully and make sure there are no loose ends when you’re done. Removing the wires will make it easier to install the new outlet.

7. Install New Outlet

Once you have removed all of the wires, it’s time to install your new GFCI outlet. Attach the wires back into place and secure them with screws or wire nuts. Make sure that all of the connections are tight to ensure optimal performance.

Install Your New Gfci Outlet

8. Test Outlet

Once the new outlet has been installed, turn the power back on and test to make sure that it is working properly. Use a voltage tester to verify that electricity is running through the outlet. The red light should be off when the outlet is functioning correctly.

9. Replace Plate

The last step is to reinstall the plate that you removed earlier. Secure it in place with two screws and make sure that the screws are tight for a secure fit. Replacing the plate will help to protect the outlet from dust and debris.

10. Enjoy Your Repairs

Once you have completed all of these steps, your red light should be gone! You can enjoy your newly-repaired outlet without any further worries. Taking care of small electrical problems like this is a great way to stay on top of home maintenance tasks.

Having a red light on an outlet can be intimidating, but it doesn’t have to be. With these simple steps, you can tackle the problem quickly and safely. Now that you know how to fix red light on outlet, you don’t have to worry about any unexpected surprises in the future! Just remember to always turn off the power before attempting any electrical repairs, and you’ll be just fine.

8 Safety Precautions to Follow When Fixing a Red Light on an Outlet

Turn Off the Electricity Supply
  1. Before attempting to repair or replace any outlet fixture, make sure you turn off the electricity supply to prevent electric shock. Also, check the circuit breaker to identify the source of power.
  2. Inspect the outlet to look for any visible signs of damage or potential hazards. If there is any exposed wiring, it’s best to contact a certified electrician immediately. Also, make sure you are wearing proper safety protection, such as rubber-soled shoes and gloves.
  3. Check the outlet itself to determine the cause of the red light. Is it being tripped by a breaker? If so, you may need to reset the breaker or even replace it if it’s faulty.
  4. Once you have identified that there are no visible signs of damage and that the outlet is securely plugged in, then you can begin troubleshooting. Also, make sure all other outlets in the same circuit are securely plugged in as well.
  5. Take a look inside the outlet to inspect the wiring and electrical connections. Determine if any of them are loose or damaged. If so, gently tighten or reconnect any loose wires as needed.
  6. Replace any outdated outlets with new ones that are UL-listed and properly rated for your circuit’s voltage and amperage requirements. Replacing old is essential for safety and efficiency.
  7. When you have finished replacing or repairing any outlet fixtures, re-energize the circuit, then inspect the red light to make sure it has gone off. If not, repeat all steps above until the issue is resolved.
  8. Finally, if you are still having trouble with your outlet issues, it’s best to call a licensed electrician for professional help and advice. This is the safest and most effective way to ensure that your outlet repairs are done correctly.

When it comes to fixing an outlet fixture, make sure you always follow these safety precautions. Always remember to turn off the electricity supply, inspect for any visible signs of damage, check all outlets in the same circuit, and replace any outdated outlets with new ones. Lastly, if the issue is still unresolved, seek out a professional electrician to assist you. With these tips in mind, you should be able to fix any red light on an outlet safely and quickly.

Frequently Asked Questions

How Long Will It Take to Finish the Project?

It depends on the complexity of the job and your experience. Generally, fixing a red light on an outlet should take about 15 minutes to complete if all the necessary tools are available. But if you’re not familiar with electrical wiring or don’t have access to the right tools, it could take much longer.

Fixing a Red Light on an Outlet

What Tools Do I Need?

You’ll need some basic tools to get the job done, such as electrical tape, wire cutters, and a screwdriver. Depending on the situation, you might also require a voltage tester or voltage meter to test for any live wires before attempting to fix the outlet. It’s important to use caution when dealing with electricity – always make sure the power is off before beginning.


All in all, fixing a red light on your outlet is a relatively easy task that can be accomplished with basic tools and the right knowledge on how to fix red light on outlet.

Not only can it save you from having to call in a professional, but it can also help you save significant amounts of time and money. So if you ever find yourself with a red light on your outlet, remember these simple steps and solutions to get back online fast.

Furthermore, once the issue has been resolved you should make sure to check for any additional safety hazards that may have been caused by the malfunctioned outlet. Being proactive about your home’s electrical systems will ensure your family remains safe and sound at all times—plus, finding out the cause of the outage can help prevent such an issue from occurring again in the future.

Leave a Comment