How to Make Led Headlights Brighter

The brightness of your headlight is a key factor in making sure you can see as far as possible while driving. If you’re looking for a cheap and easy way on how to make led headlights brighter and look as good as new, then this article is all you need.


Polishing your headlights will not only look great but will also help you see better at night. To make your headlights brighter, you must remove them from your vehicle.

You will also need a source of water, a bowl, and possibly some basic household cleaning supplies.

Now that you have taken off your headlights, it’s time to start scrubbing away any dirt or grime. To know more detailed instructions read this full blog post.

Five Easy Ways on How to Make Led Headlights Brighter

It’s easy! There are lots of different hacks that can help, including the five ways below. Give them a try and see which one works best for you.

1. Get a Car Wash Sponge and Cover Your Headlights in it.

One way to make your headlights brighter is by covering them in car wash sponges, which are designed to clean your car’s bodywork.

Stick the sponge onto the headlight casing or ​cover them in this bubble wrap material that you can find in most automotive stores.

2. Get a Microfiber Towel and Buff the Headlight Casing With it.

If you don’t have any car wash sponges, don’t worry! You can try other hacks instead, including buffing the headlights up using a microfiber towel like this one. You could also try using a soft cloth or some wax.


3. Use Toothpaste and a Microfiber Cloth to Polish the Headlight.

Another way to make your headlights brighter is by using toothpaste and a microfiber cloth like this one.

Simply wrap the cloth around your finger and use it to buff up the headlights. Be sure not to press too hard as you don’t want to scratch them.

4. Buff Up the Headlights with a Damp Towel.

A quick way to make your headlights look as good as new is by buffing them up with a damp towel, along with some dishwasher liquid. It will easily remove any dirt, grime, or bugs that have been stuck with your headlights.

5. Wrap Your Headlights.

If you’re looking for a quick and easy hack, wrap your headlight casings in aluminium foil like this one.

The foil will help reflect the light from other vehicles’ headlights back towards you, thus making them brighter! Alternatively, you could try covering them in cellophane.


So now you know how to make led headlights brighter; there’s no excuse for driving around with dull or dirty headlights anymore!

Give these hacks a try and see which one works best for you. If none of this helps, it might be time to get your car serviced by a professional mechanic.

Simple Steps to Follow: How to Make Led Headlights Brighter  

Headlights are one of the essential features of your car. These headlights take in light and then spread it in front of you so that you can see when driving at night or in the dark.

If something is making your headlights dim, then you need to know how to make them brighter again.

You can do this by applying simple hacks like buffing your headlights up with a towel, covering them in wax, or even using toothpaste to polish.

Here we will discuss all the information you need on how to make led headlights brighter!

Step 1: 

First off, make sure that your headlight lenses are clean before doing anything. That means no dirt, no scratches, and no visible stains or marks on them.

If you have a car vacuum cleaner, use this to get rid of the dust from your headlights. The next step is to apply some toothpaste!

Step 2: 

Cover the headlights with a layer of toothpaste and rub it in with a damp cloth (you’ll need to let the toothpaste build up as well).


Buff it out for around 5 minutes, and you will notice that your headlights become cleaner and brighter. This is because toothpaste is abrasive, just like sandpaper, but is much less harsh on your car’s headlights.

You can repeat this up to three times for an even brighter effect. If you want to quicken the process, use a flathead screwdriver as it is more effective than a cloth!

Step 3: 

The final step is to cover the headlights in some wax or car polish. It will help protect your headlights and keep them in top condition.

You can also apply a layer of wax to them if you want them to look good and shiny, but this isn’t necessary for making the headlights brighter.

After applying the wax, rinse your headlights and dry them with a paper towel. You might want to hose them down instead as this will remove all excess wax and shampoo, but you’ll need some fresh towels for drying after that!

Headlights Maintenance Tips

Every day we need to take care of our headlights. For most drivers, the most important thing is to change the headlights as they burn out.

This gets expensive and can lead to excessive glare from oncoming traffic. But don’t give up your hope. You can make your headlights look better and last longer with these easy tips:

  1. Use a towel or rag and buff them off regularly
  2. You can also use white vinegar and salt
  3. Apply wax with a cotton cloth
  4. Cover your headlight in toothpaste
  5. Wallpaper paste is excellent for polishing your headlights too!

A Simple Way to Remove Tree Sap From Your Headlights


The best way to take care of tree sap on headlights is to use a cloth. The cloth will act like an applicator and should get into the cracks between the headlight and other materials.

The other benefit of using the cloth is that it will prevent any other substances from coming in contact with the area. That means you can avoid getting any other contaminants on your car.

Tree sap is often quite sticky so take care not to press too hard when removing it. It would be best if you start by wiping your headlights in a circular motion around the area until the sap starts coming off.

Keep using this technique until all of the tree’s sap has been removed. Do not try to rush this process, as it will not lead to the best results!

Final Thoughts

You may not know it, but your headlights can make a big difference in how visible you are on the road. If they’re too dirty or foggy, you won’t be able to see as well, which could lead to an accident.

That’s why we recommend cleaning them regularly with one of these simple hacks! For best results when polishing up your headlights, apply a thin layer of polish before buffing away any excess material until your lenses shine once again!

Thanks for reading today’s article on how to make led headlights brighter. Remember, if you need more information about automotive mechanic services or any other type of car mechanic, please let us know.

We hope you’ve found this article interesting. If it has helped you, why not check out the rest of our blog for even more great articles?

Leave a Comment