How to Change Light Bulb in Stairwell

If you are like most people, when the light bulb in your stairwell burns out, you buy a new one. However, did you know that you can change the light bulb yourself?

How-to-Change-Light-Bulb-in-Stairwell

Being in complete darkness is not only disorienting but also dangerous. While changing a light bulb in a stairwell may seem like a simple task, there are some things to consider before taking on this project.

In this blog post, we’ll walk you through the steps necessary on how to change light bulb in stairwell safely and efficiently. Read on to know more!

Step by Step Guide: How to Change Light Bulb in Stairwell

Step 1: Unscrew the Light Bulb.

To change the light bulb in the stairwell, you will need to unscrew the old light bulb. Be careful not to touch the light bulb’s glass with your bare hands, as this can cause the bulb to break. You may need a ladder to reach the light bulb.

Step 2: Remove the Glass Globe or Shade.

Most light bulbs are secured in the fixture by one of two means: a glass globe that screws onto the top of the light bulb or a shade held in place by a series of clips.

Remove-the-Glass-Globe

Loosen the screws or press the clips and pull the Globe or Shade off the light bulb to remove the globe or shade. Be careful not to touch the light bulb with your hands, as the oils from your skin can cause the light bulb to overheat.

Step 3: Disconnect the Light Bulb.

Next, you will need to disconnect the light bulb from the electrical socket. To do this, grasp the light bulb at the base (the part that screws into the socket) and twist it counterclockwise until it comes loose. Some light bulbs may have a tab that must be depressed to release the light bulb from the socket.

Step 4: Remove the Old Light Bulb.

Once you have disconnected the light Bulb, you will need to remove the old light bulb from the fixture. There may be some screws holding the light bulb in place. Be careful not to touch the light bulb’s glass with your hands. You will need to clean the glass before replacing the light bulb if you do.

Step 5: Install the New Light Bulb.

Once you have removed the old light bulb, it is time to install the new one. Put the new light bulb into the fixture and screw it in place. Be careful not to touch the light bulb’s glass with your hands. Once the new light bulb is in place, you can connect the wires and screw the cap back on.

Step 6: Replace Glass Globe.

If your stairwell has a glass globe, you will need to replace it before turning it back on. First, remove the old globe by unscrewing it from the fixture. Then, screw the new globe into place. Make sure that the globe is screwed in tight not to come loose and fall.

Step 7: Test the New Light Bulb.

Once you have replaced the old light bulb and screwing the new one in place, test the new light bulb to make sure it works.

Test-the-New-Light-Bulb

Next, turn on the power to the fixture and flip the switch. If the light bulb does not come on, you may need to check the connections or replace the light bulb.

Some Helpful Tips and Suggestions

Here we have given some tips on how to change light bulb in stairwell.

1. Always unplug the light fixture before changing the light bulb.

2. Use a ladder to reach the light bulb if necessary.

3. Be careful not to touch the light bulb’s glass with your hands. Oils from your skin can cause the light bulb to overheat.

4. If you touch the light bulb’s glass, clean it with a soft cloth before replacing the light bulb.

5. Ensure that the screws or clips are secure before replacing the glass globe or shade.

6. Test the new light bulb to make sure it works. Turn on the power to the fixture and flip the switch. If the light bulb does not come on, you may need to check the connections or replace the light bulb.

7. Replace the light bulb following the manufacturer’s instructions.

Common Mistakes to Avoid When Changing Bulb in Stairwell:

1. Don’t Forget to Turn Off the Power. 

Always make sure to turn off the power to the light fixture before attempting to change the light bulb. This can be done by locking the breaker box and flipping the switch off or unscrewing the light bulb.

2. Don’t Touch the Bulb with Your Bare Hands.

The oils on your skin can cause the light bulb to break when you attempt to screw it in. Use a clean cloth or paper towel to handle the new light bulb to avoid this.

Do-Not-Touch-the-Bulb-With-Your-Bare-Hands

3. Be Careful of the Glass.

When changing the light bulb, be careful not to drop or break the glass. Bulbs are designed to shatter and release the light inside, but if the glass falls on someone or something, it can cause serious injury.

4. Make Sure the Fixture is Unplugged.

Before changing the light bulb, make sure to unplug the fixture from the wall. This will prevent you from being shocked when you touch the light bulb.

5. Keep a Step Stool or Ladder Handy.

If you need to reach a high-light fixture, it’s best to have a step stool or ladder to help you get up there. Trying to reach high fixtures without aid can be dangerous, so it’s always better to be safe than sorry.

6. Replace the Bulb with the Same Type.

When replacing a light bulb, make sure to use the same bulb type. Different bulbs can have different wattage ratings, and using a bulb with a higher wattage rating can cause the fixture to overheat.

7. Be Patient When Screwing in the bulb.

It can be tricky to screw in a light bulb correctly, especially if you’re trying to do it with one hand. So be patient and take your time to avoid making the situation worse.

Be-Patient-When-Screwing-in-the-Bulb

8. Double Check the Connections.

Before turning on the power to the light fixture, make sure that all connections are tight and secure. This will help to avoid any problems with the light fixture down the road.

Precautions and Safety Measures

1. Turn off the power to the fixture at the breaker box.

2. Use a step ladder or stool to reach the fixture.

3. Wear gloves to protect your hands from broken glass.

4. Remove the old bulb by unscrewing it from the socket.

5. Clean the socket before inserting the new bulb.

6. Screw in the new bulb until it is tight.

7. Turn on the power to the fixture at the breaker box.

How Do You Reach a Stairwell Ceiling?

Most stairwells will have a ladder or other means of reaching the ceiling. However, if there is no ladder available, you may be able to use a stool or other object to help you reach the light bulb.

How-Do-You-Reach-a-Stairwell-Ceiling

Changing a light bulb in a stairwell can be tricky, so it’s important to take your time and be careful.

If you’re not comfortable changing the light bulb yourself, you can always ask a friend or family member for help. Alternatively, you can contact a professional to do the job for you.

Should You Hire a Professional to Change Light Bulb in Stairwell?

There is no definitive answer to this question. It depends on several factors, including how many light bulbs need to be replaced, how high up the light bulb is, and your level of DIY expertise.

If you’re comfortable changing light bulbs and only a few bulbs need to be replaced, you can probably do it yourself. However, if there are a lot of light bulbs to be replaced or if they’re high up, it might be best to hire a professional.

Final Thoughts

Changing a light bulb may seem easy, but it can be tricky in tight spaces. Please be aware that risks are associated with changing a light bulb, such as electric shock or falls. If you are not comfortable completing this task, please call a professional to do it for you. 

In this post, we’ve outlined the steps you need to take on how to change light bulb in stairwell. We hope this information is helpful and saves you some time and hassle. Have you ever changed a light bulb in a stairwell? How did it go? Let us know in the comments below!

Leave a Comment