How to Reset Led Strip Lights

Led strip lights are a popular, energy-efficient lighting option that can be used for various purposes. However, sometimes they may stop working correctly and need to be reset.


Whether you’re looking to create a fun and festive atmosphere for a party or want to add some extra brightness to your work area, resetting the led strip lights is a quick and simple process. 

In this blog post, we will provide step-by-step instructions on how to reset led strip lights. If your led strip lights are not performing as they should, there is a reset button that you can use to restore them to their original condition.

Summary: Resetting LED strip lights is a simple process that can help resolve issues such as unresponsive or malfunctioning lights, or to restore the lights to their factory settings. Before resetting the lights, ensure they are properly connected to a power source and that the controller or remote is functional.

For most LED strip lights, resetting can be done by following these steps: First, unplug the LED strip lights from the power source and wait for approximately 10 seconds. Then, plug the lights back into the power source. As soon as the lights are powered on, press and hold the designated reset button on the controller or remote for about five seconds.

In some cases, the reset button may be a specific combination of button presses on the controller or remote. Consult the manufacturer’s instructions for the exact reset procedure for your specific LED strip light model. After resetting, the LED strip lights should function normally and respond to the controller or remote commands. If issues persist, further troubleshooting or replacement of the controller or LED strip may be necessary.

When Should You Reset Led Strip Lights?

You might need to reset your led strip lights for a few different reasons. First, if the lights are flickering or not working properly, this often indicates that they need to be reset.

Additionally, if you’ve recently changed the batteries in your remote control, it’s also a good idea to reset the lights so they can sync up with the new remote.

Lastly, if you’re planning on making any changes to the settings on your led strip lights, such as the color or intensity, it’s always best to reset them beforehand so that the changes take effect properly.

If you’re unsure whether you need to reset your led strip lights, it’s always a good idea to consult the owner’s manual for more information.

Step by Step Instructions: How to Reset Led Strip Lights

Step 1: Plug in the LED Strip Light.

First, ensure the LED strip light is plugged into an outlet. If it is not plugged in, the reset button will not work.


So you need to insert the plug into the outlet. Ensure your fingers are not touching the metal parts of the plug while doing so.

Step 2: Find the Reset Button.

On the LED strip light, find the reset button. It is generally located on the side or back of the unit. The button may be labeled as “Reset” or have a picture of a reset symbol on it.

Step 3: Turn off the LED Strip.

Once the reset button is located, turn off the LED Strip. Do this by either unplugging it from the outlet or using the power switch if there is one. Either of these methods will work.

Step 4: Take Out the Power Adapter.

Next, take out the power adapter from the LED strip. Once again, be careful not to touch any metal parts as you do this.

If you think the power adapter is still plugged in, check to see if the lights on the LED strip are still lit. If they are, the power adapter is still plugged in, and you need to unplug it.

Step 5: Press and Hold the Reset Button.

Now that the power adapter is removed, press and hold the reset button for 3-5 seconds. You may need to use a pen or other pointed object to press the button as it is often small.

You Can Check It Out to Reset Z Wave Light Switch


Step 6: Plug in the Power Adapter Again.

After holding the reset button for the prescribed time, plug the power adapter back into the LED strip.

If you think the power adapter is still plugged in, check to see if the lights on the LED strip are still lit. If you see the lights turn on, then the power adapter is plugged in correctly.

Step 7: Turn on the LED Strip Lights.

Finally, turn on the LED Strip lights by either flipping the switch or plugging it back into the outlet. The lights should now be reset and working correctly.

You Can Check It Out to Reset a Sengled Bluetooth Bulb

Few Other Options to Reset Led Strip Lights:

1. Change the batteries. If batteries power your LED lights, then one of the easiest ways to reset them is to change the batteries simply. This will usually do the trick and get your lights working again.


2. Use a different power source. Another option is to try using a different power source. For example, if you’re using AA batteries, try using AAA batteries. If using an AC adapter, try using a different outlet or plugging it into a surge protector.

3. Adjust the settings. Another possibility is that you need to adjust the settings on your LED lights. This could be as simple as changing the brightness setting or selecting a different light mode.

4. Clean the contacts. If your LED lights are still not working after trying all of the above, the problem could be with the contact points. Use a cotton swab or Q-tip to clean any dirt or residue off the contact points. Then try powering on your lights again.

Why Are My Strip Lights Not Working?

There are a few possible explanations if your LED strip lights are not working correctly. First, check to ensure the power supply is plugged in and working properly.

If it is plugged in but not working, you may need to reset the circuit breaker. You can also try plugging the power supply into a different outlet to see if that makes a difference.

If the power supply is not the problem, it is likely an issue with the controller or remote. In this case, you will need to reset the controller or remote.

It may also happen that the LED strip lights are not working because they are not properly connected to the power supply. Check all connections to make sure they are secure.

Why Are My LED Lights Stuck on One Color?

If your LED lights are stuck on one color, it is likely because the remote is not working correctly. First, check to ensure the batteries are properly inserted and there is no corrosion on the battery contacts.


If the batteries are fine, try resetting the controller or remote. You may need to replace the controller or remote if that does not work. You can also try reconnecting the power supply to see if that resets the LED lights.

Frequently Asked Questions

Where is the Reset Button on Led Light Strips?

The Reset button on a Led light strip is typically located on the back of the strip. It is usually a blue or black button with a small reset symbol on it. When you press the reset button, it will turn the entire light strip off and then back on again.

Do Led Strip Lights Have Fuses?

Yes, led strip lights usually have fuses. Fuses are designed to protect the wiring in a circuit from being overloaded, and they help to prevent the circuit from being damaged by excessive current. When a fuse blows, the excess current is automatically reduced and the lightbulb or other electronic component in the circuit is likely to fail soon afterwards. By having a few fuses in your led strip lights system, you can ensure that the overall voltage and current level in the system is within safe limits. This will reduce the chances of damage to your lights and electronics, and may even help to prolong their lifespan.

How Long Do Led Light Strips Last?

the lifespan of a light strip depends on a variety of factors including the type of light strip, how often it is used, and the surrounding environment. In general, however, light strips should last between 6 and 12 months, depending on how often they are used and how well they are taken care of. It is important to keep light strips clean and free from dust and dirt, as this can reduce their lifespan. Also, be sure not to place light strips near direct sunlight or other sources of heat, which can cause them to prematurely fail.

Can Led Strip Lights Burn Out?

Led strip lights are designed to last a long time, and they typically do not experience the same level of wear and tear as traditional incandescent or fluorescent light bulbs. However, like all electronic components, led strip lights can fail over time if they are subject to excessive heat or humidity, or if they are damaged in some other way. If you notice that your led strip lights are flickering or going out intermittently, it may be a sign that they are experiencing some type of failure. In this case, it may be best to replace the strip lights as soon as possible to avoid further damage and/or issues.

Can I Control Led Strips With Phone?

Yes, you can control LED strips with your phone! This is done by connecting the LED strip to the phone’s USB port and then using the app that came with the LED strip to control the lights. The app will allow you to set timer functions, change the colors of the lights, and more.

Final Words

Led strip lights are a great way to add extra light and pizzazz to your home. However, sometimes they can stop working or start flickering for no apparent reason. In this post, we’ve shown you how to reset led strip lights to work like new.

Resetting the led strip lights is a quick and easy process that only takes a few minutes. You’ll need a screwdriver, pliers, and wire strippers to complete the process. 

To reset your LED strip lights, you will need to cut the power supply and remove the end cap of the light strip. You will then need to find the solder points on the PCB and short them together with a metal object.

After that, reattach the end cap and restore power to the light strip. By following these simple instructions, you should be able to reset your LED strip lights in no time! We hope this guide was helpful. If you have any questions, please feel free to comment below. Thanks for reading!

Leave a Comment